Engineering Ceramic Products

  • Ceramic Wear Parts

We Supply high Alumina Ceramics seal faces from 95% to 99% Aluminia as per below datasheets. This Ceramics ware parts are specially developed for chemical plant seal face applications and other similar applications in which corrosive attack is likely to be particularly severe. This material has been subjected to extensive and rigorous laboratory testing to determine the effects of various reagents/chemicals on surface finish. The stability to acid of components made from this material has been determined to be within 0-10mg mg/cm2. (CVD Specifications).

Enquiry

Applications

Pump shaft sleeves
Pump plungers
Pump Cylinder liners

Product Specification

  Unit AI2O3 - 99% AI2O3 - 97%
Purity % >99.5 >97.0
Density g/cm2 3.89 3.71
Hardness Vickers 1kg kg/mm2 2000 1900
Moduls of Elasticity GPa 330 280
Fracture toughnees MPa*m1/2 3.8 3.5
Fracture Strength (MOR) MPa 330 320
Compressive Strength MPa 2600 2300
Thermal Expansion (CTE) 10-6/K 8.2 8.0
Thermal Conductivity w/(m-K) 30 26